Length setting adaptor
Reference: 013 23 0. .. ..
| COD. | Ø mm | Ø inch | sw | L mm | L inch. | |
|---|---|---|---|---|---|---|
| 013 23 00 60 00 | 6 | 0.24“ | 2,5 | 80 | 3.15“ | |
| 013 23 00 80 00 | 8 | 0.3“ | 3 | 80 | 3.15“ | |
| 013 23 01 00 00 | 10 | 0.39“ | 4 | 80 | 3.15“ | |
| 013 23 01 20 00 | 12 | 0.47“ | 5 | 80 | 3.15“ | |
| 013 23 01 40 00 | 14 | 0.55“ | 5 | 80 | 3.15“ | |
| 013 23 01 60 00 | 16 | 0.63“ | 6 | 80 | 3.15“ | |
| 013 23 01 80 00 | 18 | 0.71“ | 6 | 80 | 3.15“ | |
| 013 23 02 00 00 | 20 | 0.79“ | 8 | 80 | 3.15“ | |
| 013 23 02 50 00 | 25 | 0.98“ | 8 | 80 | 3.15“ | |
| 013 23 03 20 00 | 32 | 1.26“ | 8 | 80 | 3.15“ |
Length setting using a length setting adaptor. Insert cutting tool into adaptor, insert adaptor into the tool holder and adjust for desired length plus 80mm (+3.15 inch). Remove adaptor and shrink the tool.
